MAINTENANCE
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Adjusting the chain tension
WARNING!:
Before cleaning or carry out any
maintenance procedure, make sure the battery
is removed from the tool to prevent accidental
starting.
WARNING!:
The chain has sharp edges. For your
safety please use work gloves.
1. Loosen the chain drive cover hex
head screw with the provided hex
key/screwdriver tool.
2. Turn the chain tension screw clockwise to tension the chain with the
provided hex key/screwdriver tool. The tension is correct when the
chain can be pulled
5 - 6mm
way from the guide bar when using your
finger and thumb. Do not over-tighten as this will reduce the life of the
chain and guide bar.
3. Once the correct tension has been achieved tighten the chain drive
cover hex head screw to lock the bar and tension in place.
5 - 6mm gap is
the ideal tension
Maintaining the guide bar
1. Remove any sawdust from the groove in
the guide bar, including the groove. Oil
and sawdust combine and emit a burning
smell during operation if the blade is not
regularly cleaned.
2. Make sure that the oil port is not clogged.
Oil (not supplied) the nose sprocket at the
tip of the guide bar.
3. Check for oil leakage and loose
Oil
Pole pruner attachment
The chain can be sharpened using a 5/32” size file. A sharp chain
generates wood chips during the cut, a dull chain generates sawdust
powder and produces a slow cut. Chain sharpening requires special
tools. Chain sharpening tools can be purchased at your local Bunnings
Warehouse. Alternatively you can take the chain to a professional chain
sharpener.
Before storing, drain oil from chain bar oil tank, as oil can slowly leak out
over time.
Pole hedge trimmer attachment
The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job
lasts for a longer period of time it is recommended that the blade rail also
be treated with spray lubricant at regular intervals during operation.
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require re-sharpening. However, if you
accidentally hit a wire fence, stones, glass or other hard objects, you may
put a nick in the blade. there is no need to remove the nick as long as it
does not interfere with the movement of the blade. if it does interfere, use a
fine toothed file or sharpening stone to remove the nick.
fastenings, especially those securing the handles and the guide bar.
4. Reverse the guide bar every 8 working hours to ensure uniform wear.
Check the guide rails frequently and if necessary remove burrs and
square up the rails using a flat file.
DESCRIPTION OF SYMBOLS
SPARE PARTS
Battery (18V Lithium-Ion)
ACCLB-118
Charger assembly
ACCLCA-018
Chain
SPPHT2018-101
Guide
Bar SPPHT2018-102
Oil
Cap
SPPHT2018-125
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito customer service
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Warning
Do not operate in the rain
Wear eye protection
Keep bystanders away
Read instruction manual
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
Direct current
ø
Diameter
mA
Milliamperes
n
o
No load speed
Recycle battery
Do not put in the rubbish
Isolation transformer
Polarity
Do not incinerate
Do not get battery wet
Thermal cut-out
protection at 130ºC
Transformer Energy
Rating (MEPS)
Double insulated
/min
Revolutions or
reciprocation per minute
AH
Amp hour
Indoor use only
The sound power level indicates by Lw
A
in dB
Lithium Ion battery
Do not use or store battery in
temperatures exceeding 50ºC
Electrical Emissions
Conformity (EMC)
96