background image

3

GENERAL SAFETY

Thank you for purchasing the Ozeri Dual Zone Ceramic Heater and Fan. This product 

has passed extensive quality assurance tests for residential use. Every care has been 

taken to ensure that it reaches you in perfect condition.

Warning: When using electric appliances, basic safety precautions should be 

followed to reduce the risk of fire, electric shock and personal injury, including 

(but not limited to) the following:

Read all these instructions before attempting to operate this product and save these 

instructions for future reference:

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY 

MARKINGS IN THIS MANUAL AND ON THE APPLIANCE

When using an electrical appliance, basic precautions should always be followed, 

including the following:

WARNING

THE HEATER AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS:

•  Pacemakers and defibrillators may be affected by strong magnetic fields. If you or 

someone  in  your  household  has  a  pacemaker  or  defibrillator,  avoid  placing  the 

remote control in a pocket or near the device. 

•  Credit cards and electronic storage media my also be affected by magnets and 

should be kept away from the remote control and the top of the heater.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

•  This heater is hot when in use and for a short period after use. To avoid burns, do 

not let bare skin touch hot surfaces. When moving the heater, hold it by the base, 

not the air loop amplifier.

•  Keep combustible materials, such as furniture, pillows, bedding, papers, clothes 

and curtains, at least 3 feet (0.9 m) from the front of the heater and keep them away 

from the sides and rear when the heater is plugged in.

•  Extreme caution is necessary when any heater is used by or near children or infirm 

persons and whenever the heater is left operating and unattended.

•  Do not allow to be used as a toy. Close attention is necessary when used by or near 

young children. Children should be supervised to ensure that they do not play with 

the heater or remote control.

•  This heater and remote control are not intended for use by young children or infirm 

persons with reduced physical, sensory or reasoning capabilities, or lack of 

experience and knowledge, unless they have been given supervision or instruction 

by a responsible person concerning use of the heater to ensure that they can use it 

safely.

•  The base must be fitted securely before operating. Do not dismantle or use without 

the base fitted.

•  Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces. Do not 

use  in  bathrooms,  laundry  areas  and  similar  indoor  locations.  Never  locate  the 

heater where it may fall into a bath or other water container. Do not use or store 

where it may get wet or in the immediate surroundings of a bath, a shower or a 

swimming pool. 

•  A  heater  has  hot  parts  inside.  Do  not  use  it  in  areas  where  gasoline,  paint,  or 

flammable liquids are used or stored or where their vapors are present. Do not use 

in conjunction with or directly next to an air freshener or similar product.

•  Do not locate directly below a main electricity supply outlet.

•  Always  plug  directly  into  a  wall  outlet.  Never  use  with  an  extension  cord  or 

relocateable power tap (outlet/power strip) as overloading may result in the cord 

overheating and catching fire. 

•  Do not handle any part of the plug or heater with wet hands.

•  Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

•  Do not stretch the cord or place the cord under strain. Do not run the cord under 

carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do 

not route the cord under furniture or appliances. To avoid a tripping hazard 

arrange the cord away from traffic area so that it will not be tripped over. 

•  Do not use with a damaged cord or plug. If the supply cord is damaged it must be 

replaced by an Ozeri service agent or similarly qualified persons in order to avoid 

a hazard.

•  To disconnect the heater, turn the controls off, then remove the plug from the 

outlet. Always unplug the heater when not in use. 

•  Do not use if the heater malfunctions or has been dropped or damaged in any 

manner. Contact the Ozeri Helpline or return to an authorized service facility for 

examination and/or repair.

•  To prevent a possible fire, do not use with any opening or exhaust blocked, and 

keep free of dust, lint, hair, and anything that may reduce airflow. Do not put any 

object into the inlet grill or the exhaust opening as this may cause an electric 

shock or fire, or damage the heater.

•  Do not use on soft surfaces, such as a bed, where openings may become blocked.

•  Use  only  as  described  in  this  Ozeri  Operating  Manual.  Any  other  use  not 

recommended  by  the  manufacturer  may  cause  fire,  electric  shock,  or  injury  to 

persons.

•  In order to avoid overheating and fire hazard, do not cover the heater.

•  Choking hazard: the remote control unit contains a small battery. Keep the remote 

control  away  from  children  and  do  not  swallow  the  battery.  If  the  battery  is 

swallowed, seek medical advice at once.

•  Check your heater cord and plug connections. A loose fitting outlet can cause the 

plug to overheat and/or cause a fire. Be sure the plug fits tight in the outlet. Check 

frequently during use to make sure plug and outlet are not hot. If so, discontinue 

using  heater  and  have  outlet  replaced  by  a  qualified  electrician.  Note:  Heaters 

draw more current than small appliances, overheating of the outlet may occur 

even if it has not occurred with the other appliances.

•  The heater should be positioned so the airflow is directed away from any walls or 

room corners.

IMPORTANT SAFETY FEATURES

For your safety this heater is fitted with automatic cut-out switches that 

operate if the heater tips over or overheats. If the switches operate, unplug the 

heater and allow it to cool. Before restarting the heater check and clear any 

blockages and ensure the heater is on a solid level surface.

It is normal for the plug to  feel warm  to the touch; however, if there is a loose fit 

between the plug and the outlet or the plug becomes very hot, the outlet may need 

to be replaced. Check with a qualified electrician to replace the outlet.

READ AND SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY

POLARIZATION INSTRUCTIONS

This heater has a polarized plug (one blade is wider than the other). To reduce the risk 

of electric shock, this plug is intended to fit in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 

qualified electrician. Do not attempt to defeat this safety feature.

TECHNICAL SPECIFICATIONS

Model  

OZH1

Name 

Ultra-thin heater

Voltage / Frequency  120V / 60Hz

Power 

Low:800W / High:1500W

Wind speed 

≥ 1.3 m/s

Oscillation 76º

Timer 

1-12 hours

Noise level 

≤50dB

1m distance

Tip-over Protection  40 ± 10°

Size 

Φ260*845 mm

Net Weight 

4.3 kg

Gross Weight 

5.2 kg

Summary of Contents for OZH1











Reviews: