background image

                                                                                      -

2-

                                                                                   

 

 

Installation and User

’s Manual. 

 

FEATURES 

 
Congratulations on purchasing an Ozcharge fully automatic switched-mode battery charger. 
Ozcharge battery chargers comprise of the latest technology and incorporates the following features: 
 

 

High frequency Switching Mode with pulse charge output. 

 

Microprocessor controlled. 

 

No fan! No noise to keep you awake at night and no moving parts to wear out and fail. 

 

Quick connect output plugs. 

 

Automatic Power-Supply mode. 

 

Suits all Lead Acid battery types (user selectable): 
Conventional wet flooded, Calcium, Absorbed Glass Mat (AGM) & Gel     

 

Battery rejuvenation (De-Sulphation) function (user selectable) 

 

Heavy-duty cables & fittings. 

 

Designed for Australian & New Zealand conditions and applications. 

 

  - - - - - - - - - - - - - - - - - - - WARNING - - - - - - - - - - - - - - - - - - - - - 

 

 

 

While this charger is dust-proof and water splash-proof to IP64, we recommend that it is used and/or 
installed indoors only and should never be directly exposed to water, rain, pressure washer, etc. 

 

Make sure you are using proper AC mains power voltage. 

 

Do not attempt to use the charger if it has been dropped or damaged. 

 

Never attempt to charge a damaged battery, frozen battery or non-rechargeable battery. 

 

Do not use the charger in a closed area or poorly-ventilated area. 

 

Never smoke, use an open flame, or create sparks near a battery or charger during charging operation as 
this may cause an explosion / explosive gas. 

 

Do not operate the charger if any of the cables or plugs are damaged. 

 

Do not disassemble the charger. Take it to a qualified and authorised person if any repair is required.   

 

Keep the charger away from infants, children and pets. 

 

CAUTIONS

 

 

Ensure the correct Battery Type is selected before the first use 

or any

 battery replacement. 

Do not charge using an incorrect Battery Type setting. (EG: do not charge a Gel battery with Calcium 
battery selection setting or vice-versa as this may damage your battery) 

 

If you are in doubt as to what battery type you have, refer to the battery Supplier or Manufacturer. Do not 
guess or assume as this may damage your battery. 

 

Incorrect Battery Type selection may result in you battery being under charged or over charged and any 
damage will not be covered by warranty. 

 

Check the Battery M

anufacture’s specific precautions. EG: such as removing or not removing cell caps 

whilst charging.     

 

As a general precaution, someone should be within range of your voice or close enough to come to your 
aid while working with any battery. 

 

Wear protective goggles and turn your face away when connecting or disconnecting a battery. 

 

If battery acid contacts your skin or clothing, wash immediately with soap and water. If acid enters your eye, 
immediately flush the eye with running cold water for at least 10 minutes and seek medical attention. 

 

To reduce risk of damaging the battery, avoid dropping any metal tools onto the battery. Wrap spanners 
with electrical insulation tape to minimise the risk of a short circuit. 

 

Never rest the battery being charged on top of your Ozcharge battery charger or place the charger on top 
of the battery. 

 

The battery charger should be installed and kept as far away from the battery as the output cables permit. 

 

 

Summary of Contents for OC-1210PS









Reviews: