5 • Oz Charge manual
www.ozcharge.com.au
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance free batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway between
the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
STEP 2 - Connecting the battery charger to your battery
•
Simply plug the charger lead into the fly lead from your device, ensuring the connector is
lined up correctly and not stressed. (Note: The plugs only fit one way and excess force is not
advised)
STEP 3 - Connecting the battery charger to Mains Power (100-240VAC)
•
The Charger will automatically start when AC power is connected and switched ON.
(Note: If the Fault Indicator LED illuminates Red, please check your connections.)
PP30
Connector
