Oxygen RKD-3799BT, Manual

Page: 9 / 15

E-8
Press the

STOP BUTTON
（
#19
）
when playback CD, the disc will cease to play.
(Total number of tracks will show on LED DISPLAY (#25).
SKIP AND SEARCH
You can choose to play your favorite track directly by taping the SKIP /
BUTTONS (#22) repeatedly. The LED DISPLAY (#25) will indicate the correct track
number selected.
To locate a particular section within a track, press and hold the SKIP
/
BUTTONS (#22) until the section is found.
REPEAT
To repeat a particular track currently playing, press the REPEAT BUTTON
（
#23
）
once. The REPEAT INDICATOR (#24) will flash.
To repeat all tracks, press the REPEAT BUTTON
（
#23
）
twice. The REPEAT
INDICATOR (#24) will light up and stay lit.
To cancel the repeat function, press REPEAT BUTTON
（
#23
）
again. The REPEAT
INDICATOR (#24) will turn off.
PROGRAM
1. In stop mode, press PROGRAM BUTTON (#18)
. “01“
will flash on the LED
DISPLAY (#25).
2. Press SKIP / BUTTONS (#22) to select a desired track and press
PROGRAM BUTTON (#18) to conform. The PROGRAM INDICATOR (#4) will
flash in the course of programming.
3. Repeat above steps to program up to 20 tracks.
4. Press
PLAY/PAUSE BUTTON (#21) to start program playback. The
PROGRAM INDICATOR (#4) will light up and stay lit.
5. To cancel program playback, press

STOP BUTTON (#19) twice. The
PROGRAM INDICATOR (#4) will turn off.
Notes:
If you encounter CD playback problem, either of the following ways may help.
1. Turn off the unit. Disconnect the AC power cord from AC SOCKET and
reconnect it again.
2. Clean your CD disc.
AUX OPERATION
This unit provides an AUX IN JACK (#20) for connecting external audio devices like
MP3 players, CD players, smart phones and iPods (except iPod shuffle 3rd
generation) to listen to your external source through the speakers of this system.
1. You need an audio cable (not included) with one 3.5 mm stereo plug on each
end of the cable.
2. Plug one end of the cable into the AUX IN JACK (#20) located on the left-hand
side of the unit and the other end of the cable into the Line-out Jack or
Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. Turn on the unit by setting the FUNCTION SELECTOR (#9) to CD/AUX position.
5. The volume level can now be controlled through the VOLUME CONTROL (#10)
of the unit. Operate all other functions on the auxiliary device as usual.