E-11
5. Keep your unit away from heating appliances and sources of electrical
noise such as fluorescent lamps or motors.
6. If drop-outs or interruptions occur in the music during
CD play, or if the CD fails to play at all, its bottom
surface may require cleaning. Before playing, wipe the
disc from the center outwards with a good soft cleaning
cloth
ABOUT CASSETTE TAPES
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs for
each side of the tape. If the erase prevention tab for side A is removed, you cannot
accidentally record on side A. The Record key cannot be depressed if the erase
prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the record
key form locking.
If later you do wish to record on side A of the cassette, cover the tab opening with a
piece of cellophane tape. This will allow the Record to function again.
CASSETTE CARE
Two common causes of trouble experienced when using cassettes are:
1) Tape Jamming
–
Leading to uneven speed in playback, and
2) Tape Tangling
–
Where the tape wraps itself around ital parts of the
mechanism.
To reduce the likelihood of these problems occurring, the following precautions
should be observed:
⚫
Check that there are no loose layers of tape visible through the cassette center window
(see Fig. 1). Take up any loose layers, using a pencil or hexagonal barreled ballpoint pen,
before inserting the cassette into the machine (see Fig.2)
Summary of Contents for RKD-3799BT
Page 6: ...E 5 ...
