- 31 -
-
Connect your USB device directly to the USB port of the device. Using an
extension cable is not recommended and may cause interference and
failure of data transfer.
The unit cannot read my memory card.
-
Check firstly that your memory card is compatible with the unit.
Supported memory cards are SD, SDHC formats. We have tested this
unit with most of the market’s memory cards; we cannot however
guarantee a full compatibility with all the cards in the market because of
the multiple technology standards in use. Should you have a compatibility
problem: please use a memory card with a lower capacity (32GB or
lower) or else connect the unit through a USB device.
10. Recording operation
1. Plug the microphone to the
MIC-1
or
MIC-2 port
.
2. Insert USB/SD card into the corresponding port: press
USB/SD
button on
remote control.
3. If the USB/SD card is plugged into the speaker for the first time, the system
will automatically create a folder named “
RECORD
”
to save the recorded
files (FAT32 USB file system is supported, recording quality is 128Kbits).).
4. When you are ready to record, press
REC
button on unit or
REC
key on
remote control to go to recording mode. The current sound output will stop
and go to mute status, screen shows "
REC
". The device starts recording
when the screen shows 00:01, and users can use the microphone to record.
5. Then, press
REC
button again on remote control to stop recording
function.
6. After recording finished, press
button on unit or
key remote control
to play/pause the recording files.
Note:
-
Only the microphone can be recorded. The simultaneous recording of
two audio sources is not available on this device.
-
When inserting a USB/SD card to the corresponding port, if there are
recording files on USB/SD card,
long-press
REC
button on device, and
then short-press
key, it will play the recording files;
long-press
REC
button on device again, it will playback the MP3 files.
