- 30 -
3. During FM auto searching, press
button on the unit to stop searching
the radio stations.
4. Press the buttons
/
on the unit, or the keys
/
on the remote
control to listen to the various radio stations which are saved in memory.
5. Press
FM+
/
FM-
buttons on remote control to increase/decrease 0.1MHz
each time to search radio stations manually.
Remark:
The radio channels which are searched manually could not be
saved.
9. USB/SD operation
Connecting a USB device or a SD card
1) Power-on the unit.
2) Insert a
USB
key /
SD
card to the interface.
3) When a USB/SD device is connected to the unit, press the
MODE
repeatedly on the unit or press
USB/SD
on the remote to select USB/SD
mode.
4) Press stop key
on remote control to stop audio playing.
Remark:
Depending on the capacity of the device, the reading can take more
than 1 minute.
The unit cannot read my USB device.
-
Once you have plugged your device to the unit, you may need to switch
on the USB device before it can operate.
-
This unit does not support a direct USB connection with a computer. You
need to use a USB device, a MP3 player or a PMP (Portable Multimedia
Player with hard disk).
-
If you are using a USB external hard disk: you need to connect your
device simultaneously to an external power source and to the unit. If you
are using a self-powered PMP, make sure that the battery is sufficiently
loaded.
-
Check that the files system of your USB device is formatted into the FAT
or FAT 32 format. USB device formatted into NTFS are not compatible
with this unit. Caution: if you attempt to modify your file system,
formatting your device will erase all data. Please refer to your USB
device’s instruction manual first.
