- 28 -
6. Bluetooth operation
Pairing a Bluetooth device
Before you can use the amplifier speaker with your phone or other Bluetooth
capable device you will need to pair the device to the amplifier speaker.
1. Press
MODE
button on unit or
Bluetooth
button on remote control
repeatedly until you see the LED indicator
shows “
BLUE
”, and then
Bluetooth
logo on display stay flashing when no other devices paired.
2. Enable the
Bluetooth
function on your smart phone and search for a
device labelled
“PULSION 12.1”
in the available list.
3.
Select and enable pairing for the device “
PULSION 12.1
”.
4. If pairing is successful the amplifier speaker will beep and indicator stops
flashing.
During playback, you can:
1.
Press
button to play or pause playback of the selected track on
the audio device.
2. Press or
to skip to last or next track.
Note:
The operation range of Bluetooth is approximately 10 meters (30 feet). Any
obstacles in the path between devices may reduce this range.
Only one Bluetooth device can be paired at a time.
7
. General operation
Connecting mains power
1. Connect the AC power plug to the power supply outlet.
2. Switch the power button to
AC
position, the power ON/OFF button is
located at the real panel of the device. Switch the power button to
DC
position for battery use and
OFF
to power off the unit.
Standby mode
1. Press the
STANDBY
button on the remote to wake the unit from
STANDBY
mode.
2. To enter
STANDBY
mode, press
STANDBY
button.
