A
B3
30
MXL-Timing Belt
(Box 1/Bag 8)
OXY0258-Tail
Case Center
Tail Case Assembly
Tail Boom Pre Assembly
2 x M1.6X5 Hex
Cap Screw
Belt Tensioner
Pre Assembly
Fine Adjust Shims Note :
In order to give fine adjustment options,
in the Extra Hardware Bag you will find
extra shims 2.55X4.5X0.1.
Start assembly WITHOUT any
shims. If Tail Shaft has sideways play
more than 0.2mm,
add shims as required, to one side, as shown.
PRO TIPS: For best Tail performances little
side play is recommended.
Tail Shaft Pre Assembly
OXY0540 -
Tail Case Rod
M2 x12 Hex
Cap Screw
( don't add loctite )
4 x M1.6 x5 Hex
Cap Screw
Note: all screws M1.6x5 in this step
need add loctite during assembly.
Note: Line up the
holes, so the set
screw seats correctly
into tail shaft lock hole.
Set Screw M3x3
Chapter 6: Tail Assembly
Tail Assembly Step 1
Tail Assembly Step 2
Tail Assembly Step 3
before install
any
shim
read carefully fine
adjustment shims note.
Smaller ID 4
Vertical Fin side.
A
page 11
1 x Set Screw M3x3
2 x M1.6X5 Hex
Cap Screw
Loctite 243
Loctite 243
Loctite 243
