DFC Arm
OXY0447 -
DFC Pin Screw
OXY0530 -
2X4X4.4 Bushing
Once you finish assembly, ensure the DFC
Arms can rotate without friction. If the DFC
Arms are assembled correctly, rotation
should be smooth and without friction. In
case of any friction, recheck each
component and re-assembly as necessary.
Important Note:
this part, for tuning reasions,
comes factory pre assembled,
it ready to use.
Swivel Ball Note:
The Swivel Ball is pre-assembled with a
precise fitting. When new, the Swash Plate
center ball will have a little friction. After a
few flights and “break-in” it will come smooth,
keeping the best precision without play.
OXY0020-M1.2x2
Special Screw
Center Ball
Swash Plate Assembly
(Box 1-1/Bag 6)
Important Note:
This part comes pre assembled
WITHOUT thread lock. Follow
the instruction for final assembly.
Chapter 11: Main Rotor Assembly
Main Rotor Assembly
(Box 1-1/Bag 5)
DFC Arm are not symmetrical.
Flat surface faced to Screw.
Step faced to Main Grip.
Flat surface
Stepped surface
loctite 243
CA Glue
2 x OXY0521-Linkage ball
OXY0693-OXY2-Anti Rotation Pin -3mm thread
