5.Bluetooth Function –only for the model with Bluetooth
32
Multimeter Offline Record (iOS)
– the "+" model only
When measuring using the multimeter with offline record function, you can use iOS
device APP to send a command, the multimeter will start recording the measurements.
After receiving the command, the connection will be disconnected automatically. The
multimeter will record the measuring data in its own memory. After completion of the
record, use APP to reconnect the multimeter, and then you can read the measuring data
into the iOS device as a CSV file. You can use this function to record for a long time
without staff on duty, while reducing Bluetooth consumption to conserve the battery
power of the multimeter.
Note
: When the low battery indicator
appears on the meter screen, the offline
record function may not work correctly. Please check the batteries of the meter to
ensure them in a good state.
(1)
Connect the iOS device with the multimeter, see "
How to Connect with iOS Device
"
on P27.
(2)
In APP device view, tap on the
softkey on the right, select "
Record setting
"
from the pop-up menu.
(3)
Set "Record interval" and "Records counts" (maximum records count is 10,000). Tap
on "
start offline record
". The memory in the multimeter can only store the recording
data of one time. When start to record, the earlier offline record stored in the
multimeter will be overwritten. After completion of the record, the Bluetooth of the
multimeter will be disabled automatically, and the Bluetooth symbol on the
multimeter screen will disappear.
Note
: If the multimeter is in the process of recording data and not finished yet, the
APP can not connect with the multimeter. If you want to interrupt the recording
process of the multimeter, press and hold
until
disappear on the
display, or turn the multimeter off.
(4)
After completion of the record, to read the measuring data, press and hold
