5.Bluetooth Function –only for the model with Bluetooth
25
Save data
Save the displayed data into .CSV file
Share
Share the measurements via the installed sharing apps
Clear data
Clear the data that is being displayed
Setting
Record
Interval
: Set the record interval in the application
software.
Enable Period
: Log data within the defined period.
Record Period
: Define the period time if the period is enabled.
Fill
: Check to fill the area as blue below the data line.
Exit
Exit the APP
Note
: In trending graph, you can pinch the screen to zoom. The Y axis (value) can be
zoomed by gesturing along the up-down direction, and the X axis (time) can be
zoomed by gesturing along the left-right direction.
Multimeter Offline Record (Android)
– the "+" model only
When measuring using the multimeter with offline record function, you can use Android
device APP to send a command, the multimeter will start recording the measurements.
After receiving the command, the connection will be disconnected automatically. The
multimeter will record the measuring data in its own memory. After completion of the
record, use APP to reconnect the multimeter, and then you can read the measuring data
into the Android device as a CSV file. You can use this function to record for a long time
without staff on duty, while reducing Bluetooth consumption to conserve the battery
power of the multimeter.
Note
: When the low battery indicator
appears on the meter screen, the offline
record function may not work correctly. Please check the batteries of the meter to
ensure them in a good state.
(1)
Connect the Android device with the multimeter, see "
How to Connect with Android
Device
" on P21.
(2)
In APP single view, tap on the
icon on the top right, select
from
the pop-up menu.
(3)
Set "Record interval" and "Records count" (maximum records count is 10,000). Tap
on
. The memory in the multimeter can only store the recording data
of one time. When start to record, the earlier offline record stored in the multimeter
will be overwritten.
(4)
After starting, in two seconds, the APP interface will display
