Owon B35 User Manual Download Page 24 | Manualshive

Page: 24 / 43

background image

5.Bluetooth Function –only for the model with Bluetooth

20

5.

Bluetooth Function

–

only for the model with Bluetooth

The model with Bluetooth  supports  communications with Android  or  iOS  based smart
device through Bluetooth. You can use the free application software on the smart devices
to  monitor  the measurements, perform  remote control, view  trending  graphs, etc.  The
recorded data  can be saved as  CSV file.  The  maximum  number of  record  that can be
stored  depends  on the free storage space in your smart device.  More  than one meters
can be connect simultaneously.

Note

: Bluetooth connectivity works over a range of about 10 meters. The work range is

much longer in open-sided and non-occluded wide range environment, even up to 20
meters. When the Bluetooth function is idle for 10 minutes, the Bluetooth will be turned
off automatically. Before turning off, the buzzer will beep twice.

Install the free application software

System Requirements of Mobile Devices



Bluetooth 2.0 Android APP

Android devices with Bluetooth connectivity.
Android versions: 4.0 or above



Bluetooth 4.0 Android APP

Android devices with BLE 4.0 connectivity.
Android versions: 4.3 or above



Bluetooth 4.0 iOS APP

iPhone 6s/6s Plus, iPhone 6/6 Plus, iPhone 5c/5s, iPhone 5
(Support iPhone with BLE 4.0 connectivity, iOS7.0 or above; iPhone 4s or the older
devices are not supported.)

For Android device

Based on the system and Bluetooth version of your mobile device, select one from the
QR Codes below, scan it with your mobile device, select the app and install it.

Bluetooth 2.0 Android APP

Bluetooth 4.0 Android APP

«
...
22
23
24
25
26
...
»

Summary of Contents for B35












































Reviews:

No comments

Related manuals for B35

Brand: Keithley Pages: 158

Brand: Raisecom Pages: 19

Brand: Velleman Pages: 80

Brand: YATO Pages: 68

Brand: Beijing Huahuan Electronics Pages: 28

Unitest Hexagon 310

Brand: BEHA Pages: 80

Brand: Extech Instruments Pages: 9

Brand: Extech Instruments Pages: 18

Brand: Sifam Tinsley Pages: 16

Brand: TECPEL Pages: 54

MULTIPLEXER PLUG-IN 1260-134

Brand: Racal Instruments Pages: 41

Brand: Facom Pages: 260

DC-MULTISER-1UH-DIN

Brand: KAEL Pages: 13

Brand: Tenmars Pages: 40

Brand: National Instruments Pages: 37

Brand: Keithley Pages: 123

Brand: UNI-T Pages: 2

Brand: UNI-T Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands