52 GB/IE
1. Press the Function selection button
15
four times. The
“Double Pythagoras“ triangle icon of measuring mode indication
symbol
25
appears on the display.
2. Now measure the left hypotenuse (largest distance to the left)
25 a
and then one leg (shortest distance to the measurement
surface)
25 b
and finally the right hypotenuse (largest distance
to the right)
25 c
by pressing the MAES button
16
(fig. F).
The corresponding line of the “Double Pythagoras“ triangle
icon flashes for the individual measurement values. Right after
the third measurement, the calculated length will be shown on
the bottom row
23
of the display and the corresponding line
of the “Double Pythagoras“ triangle icon stop flashing. The in-
dividual measured values will be shown on the top 3 rows of
the display.
Note:
Please note that angular error (no right angles) will lead to
incorrect results. Ensure that the measured distances lie on a plane
(alignment).
Addition (Plus)
1. To add two individual values, take a measurement (length or
area or volume) so that the display is showing a value.
2. Then press the add / subtract button
7
to start the Addi-
tion (Plus) function. Now, the plus symbol will be flashing on
the “value-3“ row
22
of the display.
3. Now take a second measurement (length or area or volume).
The second measured / calculated value will be shown on the
“value-3“ row
22
of the display. Right after the second
