Owens Corning 313221M, Instruction & Parts Manual

Page: 15 / 60

Setup
313221M 15
Keep the felt washers in the pump wet-cups saturated
with Graco ISO pump oil, Part No. 217374. The lubricant
creates a barrier between the red fluid and the atmo-
sphere.
9.
Fill Wet-Cups
10.
Install suction tube
NOTICE
To prevent cross-contamination of fluids and equip-
ment parts, never interchange component A and
component B parts or containers.
Label one pail “A” and the other “B”, using the labels
provided. Always doublecheck which material you
have before placing suction tubes in pails.
Using a drill and mixing blade, mix filled or sep-
arated materials in the pail. Material left in the
pails overnight may need to be remixed.
Fill wet-cups through
slots in plate, or loosen
screws and swing plate
aside.
Pump rod and connecting rod move during opera-
tion. Moving parts can cause serious injury such as
pinching or amputation. Keep hands and fingers
away from wet-cup during operation. Shut off Motor
Power before filling wet-cup.
a.
Open red and white fluid pails and posi-
tion in front of suction tubes.
b.
Stand behind unit and hold crossbar.
Lean unit backwards until the suction
tubes are above the supply pails.
c.
Place suction tubes in pails.
Cut portion of the pail’s lid for suction tube and
assemble on pail to prevent debris from entering
pumps.
A
B
r_256765_313221_b_12
A
B
r_256765_313221_b_17