background image

Shock Alarm 

 

https://maps.google.com/maps?q=22.67680N,114.15188E 

 

Battery:88% 

 

3. Disarm (Shock Alarm) by sending SMS 

 

Send SMS 

“DISARM*12345678” to tracker, “DISARM” is a command, 

12345678

is password, 

 

the tracker will send back the information 

“Set Shock Alarm OFF” to indicate the operation is success 

 

and disable the shock alarm, if the password is not right, the operation is fault, the tracker will send 

 

back information 

“Wrong Password”. 

 

4. SOS Emergency Help (No Platform Necessary) 

 

In the normal mode press the button ON/OFF on the tracker and don

’t release (Press button over 6 

seconds),  the  GREED  LED  will  flash  quickly,  later  it  will  be  turned  OFF,  then  release  the  button,  the 

tracker will send SOS help information to all 3 preset phone, and then call the authorized number A first, if 

no answered then B and C, if 3 authorized number all no answered, then stop calling. 

 

The SOS SMS information sample is as follow: 

 

HELP! 

 

https://maps.google.com/maps?q=22.67680N,114.15188E 

 

Battery:91% 

 

If no authorized number is added, the SOS information can not be sent. If the SOS information is 

received, please confirm the user is safety. 

 

Settings Commands 

 

1. Set Tracker Working Mode: (1.Shock Control, 2. Keep Online, 3.SMS Locate) 

 

Send SMS 

“MODE*12345678*X” to the tracker, “MODE” is command, “123456” is password, “X” is 

the working mode, it is 1,2,or 3. after receive the command, the tracker will reply SMS 

“Mode X OK ” . 

The working modes are described below: 

Mode 1 (Default Factory Mode) ------ Shock Control ON/OFF & Uploading 

 

This  mode  is  the  default  factory  working  mode.  under  this  mode,  normally  the  tracker  is  sleep, 

when the tracker begin to move, the tracker is triggered by shock sensor, the tracker will be turned on 

and  the  location  begin  to  upload  to  the  server,  default  every  30  seconds  the  tracker  will  upload  one 

location to server, after the tracker stop moving 2 minutes, the tracker will turn off GPS module & stop 

uploading location  to  server,  after  the  tracker  stop  moving  10 minutes,  the  tracker  will  turn  off  2/3/4G 

module and going to sleep. The sleep mode will cost very few battery power. 

 

Mode2 ------ Keep Online Continuously & Uploading 

 
 

-

7

Summary of Contents for PL641















Reviews: