Overmax X-bee 9.5, User Manual

Page: 39 / 208

EN
How to charge batteries
See: fig. 10.
1.
Connect the USB cable to the USB power adaptor (feeder cable is not
included).
2.
Connect second tip to the battery charger.
3.
Connect the battery to the battery charger.
When charging batteries, greed LEDs on both sides of the device flash, and
red LED glows constantly.
When charging is over, both green and red LEDs glow constantly.
If the battery charger itself (without the battery) is connected to the AC
adapter via the USB cable, or in the event of any malfunction of the device:
red LED glows constantly and green lights on both sides of the device are off.
Use a feeder cable USB 5 V, 2A (not included). Other kinds of feeder cable
may affect the product charging time. To charge, do not use PC USB ports.
A failure to follow the battery charging instructions may lead to serious
damage to the battery or charger.
After you have flown the drone, it is advisable to charge it for about two
hours. If the drone is not used for a long time, it is advisable to make its
battery flat and charge it fully at least once a month.
How to assemble the camera
1.
Insert a white camera plug in the drone port (see: fig. 11).
2.
Insert the camera bump in the drone hole at the angle of 90°
(perpendicularly to the longitudinal axis of the product).
3.
Turn the camera right to a regular position and make sure it has been
mounted properly and is stable.