DEVICE OUTLINE
1.
On/off switch
2.
Air outlet
3.
Indicator
4.
Power port
5.
Air inlet
6.
Tank
7.
Tank overflow protection
8.
Tank lid
9.
Feeder cable
10.
Feeder plug (to be inserted in the device)
11.
Feeder plug (to be inserted in the power port)
HOW TO USE
General instructions
1.
Supply power to the feeder cable and insert the plug into the device.
2.
Press the on/off switch to switch the device on. The indicator will be illuminated in green.
3.
To switch the device off, press the on/off switch.
Indicator
The indicator is green when the device dries the air. When the tank is full, the indicator goes red.
1.
Keep the on/off switch pressed for about 3 seconds to switch the indicator off. The indicator
will go on when the tank is full.
2.
Keep it pressed again for about 3 seconds to switch it back on.
Low temperature protection
When the device detects very low temperature in the radiator, it will stop drying the air. When
the temperature rises, the device will switch into a normal operating mode automatically.
Full tank
1.
The tank has a maximum capacity of 600 ml.
2.
The indicator will go red when the tank is full. The device will stop drying the air automatically.
3.
When the tank is full, switch the drier off and remove the tank.
4.
Pull out the tank lid and pour water.
5.
After you have emptied the tank, slide the lid back, place the tank in the drier and switch the
device back on to make it work.
NOTE!
When drying the tank, do not incline the drier and tank.