Overlander VSRmini, Operating Manual

Page: 18 / 24

10. Save Data program
Program Select
This screen shows the specifications of the
battery you wish to charge. This example shows a
3000mAh 12S NiMH battery pack.
Here you can set up the charge current for the
manual charge mode, or the current limit for the
automatic charge mode. Each mode can be
switched by pressing INC and DEC at the same
time when the current field is blinking.
On this screen the user can set the desired
discharge current and final voltage.
Then you can chose whether you want to cycle
your NiMH pack. Select the sequence and the
number of cycles you wish to carry out.
Press
Start/Enter to save all of the parameters.
The VSRmini has a data storage program that allows the user to store up to 5 battery
data settings, that can then be easily loaded up and reused, saving the user from
having to input all of the correct settings again.
To set up the parameter values that you wish to save, press
Start/Enter to make the
value blink then use INC or DEC to find the value you want and then Start/Enter
again to select.
<Batt type Start > 3 seconds
stop Enter
Start > 3 seconds
Enter
<DEC INC >
<DEC INC >
Display
PROGRAM SELECT
SAVE DATA
Display
NiMH CHARGE At*
CUR LIMIT 5.0A
Display
NiMH DISCHARGE*
1.0A 11.0v
Display
NiMH CYCLE *
DCHG>CHG 3
Display
Save...
Display
SAVE [01] NiMH
14.4 3000mAh
Start
Enter
Voltage
Data
Number
Capacity Type of
Battery
- +
<DEC INC>
- +
<DEC INC>
- +
<DEC INC>
- +
<DEC INC>
- +
<DEC INC>
- +
<DEC INC>
-
15
-