10401076-001
©2020-21 Overland-Tandberg
11
RDX QuikStor Internal SATA III Device Reference Guide
2 Drive Specifications
Mechanical Dimensions and Weight
The Internal Drive fits both 3.5-inch and 5.25-inch half-height enclosures for diskette or disk drive
using standard mounting holes for a half-height drive.
Power Requirements
This addresses both the power source and power requirements.
Drive SATA III Power Source
The RDX QuikStor SATA III Internal Drive draws power from the Host power supply.
Environmental Specifications
The following definitions are used in this section:
•
Operating
– The unit is unpacked, power is turned on, and a media is inserted.
•
Storage
– The unit is unpacked and power is turned off (non-operating).
•
Transport
– The unit is packed in original package as when ready for shipment from
factory.
Temperature and Relative Humidity
Form Factor
3½” Internal SATA III
5¼” Internal SATA III
Height
41.4mm (1.63 in.)
41.4mm (1.63 in.)
Width
101.6mm (4.00 in.)
146.0mm (5.75 in.)
Length (Including Bezel)
159.4mm (6.28 in.)
171.9mm (6.77 in.)
Weight
408g (0.90 lbs.)
635g (1.40 lbs.)
Orientation
Horizontal ±90°
Horizontal ±90°
Mode
Temperature
Rel.
Humidity
Max. Wet
Bulb Non-
condensing
Thermal
Gradient
Maximum
HDD
Temp
Altitude
Operating 10 to 40°C
(50 to 104°F)
20 to 80% 29°C
(84°F)
10°C/hr
(18°F/hr)
60°C
(140°F)
-15 to 3048m
(-50 to 10000ft)
Storage or
Transport
-40 to 65°C
(-40 to 149°F)
8 to 90%
38°C
(100°F)
20°C/hr
(36°F/hr)
N/A
-15 to 10660m
(-50 to 35000ft)
