10
1. Install cord grip or conduit connector to interface junction box for CAT 5 cable(s).
2. Plug CAT5 cable into display and route cable to interface box.
3. Plug CAT5 cable into J4 connector on circuit board.
4. Plug CAT 5 cable from second display (if used) into J4 connector on circuit board.
CONNECT INTERFACE TO DISPLAY PANEL
CAT 5
Display
Cables
Remove knockouts
Interface
Cable
1
Interface
Cable
2
Install 1/2in. NPT or other suitable
connector into enclosure. (Adhere
to local electrical code(s) and
regulations).
J4
J3
J2
J1
