Regudis W-HTE
Installation
6.3.2 Mounting of the ball valve connection
set
1
2
Fig. 22: Mounting of the ball valve connection set
1
Threaded bolts
2
Ball valve connection set
Observe the separate instructions for the ball
valve connection set.
Fixing material is included with the cabinet.
1
Slide the rubber washers onto the threaded bolts (1) in
the cabinet.
2
Push the ball valve connection set (2) onto the
threaded bolts.
3
Align the ball valve connection set horizontally.
4
Slide the washers onto the threaded bolts.
5
Screw the ball valve connection set to the threaded
bolts with the hexagon nuts.
6
Close all ball valves.
7
Connect the pipework to the ball valves.
The screed cover can be removed for pipe
installation, it must be mounted during masonry
work, plastering and screed work.
Z
The ball valve connection set is mounted in the
cabinet.
6.3.3 Mounting of heating circuit connection
fittings for an additional direct heating
circuit
Only if you use an additional direct heating circuit in
combination with a flow temperature control module:
Observe the separate instructions for the heating
circuit connection fittings..
f
Fit the heating circuit connection fittings to the heating
circuit return and the heating circuit supply.
6.3.4 Mounting of the station
1
2
Fig. 23: Mounting of the station
1
Station
2
Threaded bolts
Fixing material is included with the cabinet.
1
Slide the rubber washers onto the threaded bolts (2) in
the cabinet.
2
Position the seals on the individual ball valves of the
ball valve connection set.
3
Slide the station (1) onto the threaded bolts (2) in the
23
134403082-V09.03.2022
Summary of Contents for Regudis W-HTE
