![background image](http://html1.mh-extra.com/html/oventrop/okf-mq25/okf-mq25_installation-and-operating-instructions-manual_1662739027.webp)
27
Valves, co systems
Flat-plate collector
“OKF-MQ25”
Installation and operating instructions for the specialised installer
EN
1 General information
1.1 Information regarding installation and operating
instructions
These installation and operating instructions serve the installer to
install the flat-plate collector professionally and to put it into ope-
ration.
Other valid documents – manuals of all system components as
well as valid technical rules – must be observed.
1.2 Keeping of documents
These installation and operating instructions should be kept by
the user of the system.
1.3 Copyright
The installation and operating instructions are copyrighted.
1.4 Liability
The manufacturer does not accept liability for damages and
malfunctions caused by the nonobservance of the installation
and operating instructions.
1.5 Symbol explanation
Safety guidelines are displayed by symbols. These guidelines
are to be observed to avoid accidents, damage to property
and malfunctions.
Illustr. 1: Flat-plate collector “OKF-MQ25”
Read installation and operating instructions in their entirety
before installing the flat-plate collector!
Installation, initial operation, service and maintenance must
only be carried out by qualified tradesmen!
The installation and operating instructions, as well as other
valid documents must remain with the user of the system!
Content:
1. General information............................................................ 27
2. Safety notes ....................................................................... 27
3. Transport, storage and packaging ..................................... 28
4. Technical data .................................................................... 30
5. Rooftop installation ............................................................ 32
6. Freestanding installation .................................................... 39
7. Collector connection and sensor installation..................... 50
8. Operation............................................................................ 51
9. Maintenance ........................................................................ 51
10. General terms and conditions of sale and delivery ............. 51
Subject to technical modification without notice.
136148080 07/2016
For an overview of our global presence visit
www.oventrop.com.
DANGER indicates an imminent dangerous
situation which will lead to death or serious injury if the safety gui-
delines are not observed.
DANGER
!
NOTICE indicates a possible damage to
property which may occur if the safety guidelines are not obser-
ved.
NOTICE
WARNING indicates a possible dangerous
situation which may lead to death or serious injury if the safety gui-
delines are not observed.
WARNING
!
CAUTION indicates a possible dangerous
situation which may lead to minor or moderate injury if the safety
guidelines are not observed.
CAUTION
!
2 Safety notes
2.1 Correct use
At the time of development, the flat-plate collector was designed
and manufactured according to the valid, approved rules of tech-
nology and is fail-safe.
Safety in operation is only guaranteed if the flat-plated collector
is used correctly.
The application of the collector may, however, include certain dan-
gers if it is not used properly or correctly.
Any use of the collector outside the above applications will be
considered as non-compliant and misuse. Claims of any kind
against the manufacturer and/or his authorised representatives,
due to damages caused by incorrect use cannot be accepted.
The observance of the installation and operating instructions is
part of the compliance terms.
!
Summary of Contents for OKF-MQ25
