oventrop Multidis SFQ, Operating Instructions Manual

Page: 22 / 40

Multidis SFQ
Transport and storage
You can obtain spare parts and accessories
from specialist stores.
When selecting the cabinet, please note
that the overall depth and length of the
Multidis SFQ heating circuit distributor/
collector will increase if you use
accessories such as ball valves or heat
meters.
4.1 Ball valve
Fig. 7: Dimensions of the ball valve
Item no. Size D L1 L2
1406383 DN 20 G ¾ 55 mm 57 mm
1406384 DN 25 G 1 80 mm 60 mm
1406483
(with
thermo-
meter)
DN 20 G ¾ 73 mm 60 mm
1406583
(with
thermo-
meter)
DN 20 G ¾ 73 mm 60 mm
1406484
(with
thermo-
meter)
DN 25 G 1 85 mm 60 mm
1406584
(with
thermo-
meter)
DN 25 G 1 85 mm 60 mm
To obtain the length with the ball valve
attached, add the length of the Multidis
SFQ heating circuit distributor/collector
(L) to the length of the ball valve (L1).
•
The ball valves item no. 1406483 and
1406484 have a red T-handle which
shall mark the supply pipe.
•
The ball valves item no. 1406583 and
1406584 have a blue T-handle which
shall mark the return pipe.
4.2 Heat meter
The installation of commercially available G 1
and G ¾ heat meters is possible.
The dimensions of the heat meter can
be obtained from the corresponding
operating instructions.
5. Transport and storage
Transport the product in its original packaging.
Store the product under the following
conditions:
Temperature range
-20 °C to +60 °C
Relative air
humidity
Max. 95 %
Particles Store in a dry and dust-
protected place
Mechanical
influences
Protected from
mechanical shoc
Radiation Protected from UV-rays
and direct sunlight
Chemical
influences
Do not store together
with solvents,
chemicals, acids, fuels
or similar substances
22 140495282-V01.09.2021