13
INSTALLATION INSTRUCTIONS
STEP E
1. Verify the level, then tighten the panel (C) on the rail (B). Make sure to have 13 mm (1/2 in.) distant from the
glass edge and drill the hole with 1/8 bit. Then screw the panel (C) to the rail (B) with screws (BB).
2. Install the vertical seal strips (I and K) and rubber strips (N) both on the glass panel (C) and door panel (D).
3. Mount the handle (H) on the door panel and make sure to put the glass protection gasket on either side of
the glass (follow the illustration).
4. Mount the metal seal strip (S) and the decorative clips (T).
O
B
T
S
S
T
C
N
I
K
D
H
BB
FF
GG
1
2
3
4
