9
INSTALLATION INSTRUCTIONS
STEP A
1. Place the track (B) at approximately 30 mm (1 1/4 in.) from the edge of the tub.
2. Once the track is leveled, mark the holes inside the track clearly on the wall (or tiles), using a pencil.
3. Temporarily remove the track. At the marked locations, drill holes using a 8mm drill bit for the wall anchors
4. Insert the wall anchors using a rubber mallet (to avoid breaking the tiles) until the anchors are flush with
the tile surface.
5. Replace the track (B) and fix it to the wall using screws (EE); making sure not to over tighten. Excessive
tightening could possibly crack the ceramic.
AA
AA
EE
EE
1
3
B
B
2
5
(AA).
