OVE 1902301, Owner'S Manual, Page: 33 / 34

CARE AND MAINTENANCE
CAUTION:
Notices
Before Each Use
Cleaning Surfaces
Storage
During periods of extended inactivity or when transporting:
supply disconnected.
1.
2.
1.
2. Abrasive cleaners will damage this product.
3.
1.
vapours and liquids.
2.
3. Keep the ventilation opening of the LP gas tank area free and clear from debris.
4.
5. See sections below for proper cleaning instructions.
6. Check all gas connections for leaks.
7. Check components for any signs of damage or rust.
8. Check and clean the burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire
9. If damage to any component is detected, do NOT operate until repairs are executed.
1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water.
2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
4. Allow to air dry.
Before each use of appliance, inspect the hose and make sure to properly locate the gas. Always inspect
the hose for evidence of excessive abrasion, cuts or wear prior to use, and make sure to leak test. The hose
assembly must be replaced prior to the appliance being put into operation if there is evidence of excessive
abrasion or wear or if the hose is damaged. The replacement hose assembly shall be that specified by the
manufacturer.
Between uses:
• Turn control knob OFF.
• Disconnect LP source.
•
snow, dust and debris).
•
• Turn Control Knob OFF.
• Disconnect LP source and move to a secure, well-ventilated location outdoors.
•
snow, dust and debris).
•
LP cylinder exposed to direct sunlight or excessive heat.
Figure 236, Page 16