Oval ULTRA OVAL, Instructions Manual

Page: 46 / 52

B-144-12-E
46
18. PRODUCT CODE CONFIGURATION
●
Main code (Meter model: 50, 52, 53, 55, 56, 57)
① ② ③ Model
L U S ULTRA OVAL (integral type) all stainless
L U J ULTRA OVAL (integral std. jacket) Element: stainless steel
④ ⑤
Capacity (Nominal Diameter) ※1
5 0 20mm (3/4") ND (Big)
5 2 25mm (1") ND (Big)
5 3 25mm (1") ND (Big)
5 5 40mm (1·1/2") ND (Big)
5 6 50mm (2") ND (Big)
5 7 50mm (2") ND (Big)
⑥
Nominal diameter
4 Nominal diameter (Big) integral type
⑦ —
⑧
Fluid category
L Liquid
⑨
Temp. category
0 60℃ and lower
1 Over 60℃ up to 120℃
2 Over 120℃ up to 200℃ w/Cooling fin
3 Over 200℃ and up to 260℃ w/Cooling fin
5 Sudden temp. change (120℃ and lower)
6 Low temp. (−60℃ and over and below −10℃) Max. temp. 60℃ w/Heating tube ※1
⑩
Major material
C SCS14 (SUS316)
S SCS16 (SUS316L)
Z Special
⑪ ⑫ Process connection
J 1 JIS10K RF
J B JIS16K RF
J 2 JIS20K RF
J 3 JIS30K RF
A 1 ASME150 RF
A 3 ASME300 RF
P 1 JPI150 RF
P 3 JPI300 RF
D 1 DIN10 RF
D B DIN16 RF
D 3 DIN25 RF
Z 9 Special
⑬
—
⑭ Explosion-proof
0 Non-explosionproof
4 TIIS
5
ATEX ※2
6 FM ※2
7 NEPSI ※2
8 KCs ※2
R EAC ※2
T ITRI ※2
⑮
Ex-proof temp. class
0 Non-explosionproof
3 T3
4 T4
※ 1 ： Please contact us if the working temperature is below -30 ℃ . Low-temperature
impact tests will be required.
※ 2 ： When register code ⑱ is "A", selectable.
※ 3 ： CRN is applicable only to FM explosionproof and ASME fl ange models.
※ 4 ： See General Specification Sheet No. GBC201 for detail.
※ 5 ： Consult OVAL.
※ 6 ：
When register code
⑱
is "A, D", selectable.
※ 7 ： When register code ⑱ is "D", selectable.
※ 8 ： When register code ⑱ is "B", selectable.
⑧ − ⑥ ⑤ ④ ③ ② ① ⑯ ⑮ ⑭ − ⑫ ⑪ ⑩ ⑨ − − ㉑ ⑳ ㉔ ㉓ ㉖ ㉕ ⑲ ⑱
Model
Fluid category
Capacity (Nominal Diameter)
Nominal diameter
Register
Regulations
Power supply
Bearing
Special
Seal material
Viscosity category
Version
Output
Explosion-proof
Ex-proof temp. class
Temp. category
Process connection
Major material
Main code
/ / / Additional code
⑯ Regulations
0 Standard
G High Pressure Gas Safety Act (Approved product) ※ w/Material test certificate
H High Pressure Gas Safety Act (Individual test)
※ w/Material test certificate
(Designed on PO issued)
J High Pressure Gas Safety Act
(Completion inspection)
※ w/Material test certificate
L Gas Business Act (Approved product)
※ w/Material test certificate
(Designed on PO issued)
M Gas Business Act ※ w/Material test certificate
Q Electricity Business Act (Certificate required)
※ w/Material test certificate
(Designed on PO issued)
R Electricity Business Act ※ w/Material test certificate
T Fire Service Act ※ w/Material test certificate
A Nuclear power
※ w/Material test certificate
(Designed on PO issued)
C CRN (Canadian Registration Number) Pattern approval ※3
K CRN (Canadian Registration Number) Pattern approval ＋ w/Material test certificate ※3
F w/Material test certificate
Z Special
⑰
—
⑱
Register
A Standard ULTRA register
B
Batch controller equipped ULTRA register (LW74E/LW76E) ※4
D Auto temp. compensator equipped ULTRA register ※ 5
⑲ Power supply
0 External power supply (standard)
V Battery drive
⑳ Output
G Standard output (open collector pulse output) ※2
A Analog ※2
D Current pulse ※2
B Voltage pulse ※6
T Current pulse + analog ※2
M Current pulse + open collector pulse ※7
W Open collector pulse + analog ※7
N No output （ w/Battery unit ） ※6
1 Pneumatic 1 step open and close (V4) (LW74E) ※8
2 Pneumatic 2 step open and close (LW76E) ※8
3 Pneumatic 1 step open and close (V3) (LW74E) ※8
Z Special
Version
A Version A
—
Bearing
0 Standard (carbon bearing)
2 Standard (strong alkali carbon)
8 Polymerizing liquid (carbon bearing)
5 Highly corrosive liquid (ceramic bearing)
6 Hydrogen peroxide solution (ceramic bearing)
7 Highly corrosive polymerizing liquid (ceramic bearing)
Viscosity category
2 Below 1000mPa·s R3 sintered rotor
3 1000mPa·s and over R3 special cut sintered rotor
5 Below 200mPa·s (sintered rotors inapplicable) Cut rotor
6 200mPa·s and over (sintered rotors inapplicable) Special cut cut rotor
7 Below 1000mPa·s (sintered rotors inapplicable)
R3 cut rotor
8 1000mPa·s and over (sintered rotors inapplicable) R3 special cut cut rotor
Seal material
F O-ring (FPM), gasket (T#1120)
C O-ring (IIR), gasket (T#1120)
T O-ring (PTFE), gasket (V7020)
P O-ring (PTFE), gasket (V7035)
Z Special
Special
0 Standard
Z Special