
E-922-1-E
13
6. OPERATION
6.1 Outline Flow
Power On
A
A
Yes
(1)
(2)
(3)
(4)
(5)
(6)
No
Yes
No
No
Yes
Yes
No
Initialization
Data entry
Reset
command
Key input
Card input
Display command
Key input
processing
Card
processing
Display
processing
(1) Initialization is performed after power on.
(2) Data input standby state "Touch the card *" is displayed.
(3) If a Reset command is present, each processing is interrupted and initialization takes place.
(4) If a key input is present, key input processing is implemented.
(5) If a card input is present, card input processing is implemented.
(6) If a display command is transmitted, a display continues for about 20 seconds and returns to the
display of (2). If other processing occurs before the display is restored, the processing (display) is
implemented by priority.
• Key input processing and card input processing are not carried out in parallel.
If either one processing is in operation, the processing coming later is not accepted.
NOTE * : In case of non-contact type specification, "Touch the card" is displayed.
In case of magnetic specification, "Insert a card" is displayed.
Fig. 6.1