![background image](http://html1.mh-extra.com/html/oval/el-2310-08e-series/el-2310-08e-series_instruction-manual_1662134044.webp)
E-023-2-E
④
Click "OK" to execute the checks. Once they are finished, a message box (Fig. 94) will be displayed.
Click the "OK" button to complete the hardware check.
The results are displayed as shown in Fig. 95.
⑤
Click the "OK" button to return to the window from before the check, and then click the "Cancel" button
to close the window.
Clicking "OK" here will start the hardware check over again.
3.7.1.1.2 Drive resistance check (Drive coil check)
①
Click the "Diag/Service (T)" menu, select "Self Diag" from the "Test/Status" drop-down list, and then
click "Drive coil check" under that.
②
The following window will be displayed (Fig. 96). This will check the drive resistance. Click "OK" after
completely stopping the fluid.
・
"Resistance value": Checks the drive resistance for approximately 30 seconds.
Fig.94
Fig.95
Fig.96