E-023-2-E
3
⑤
After the setting is complete, click the "OK" button to display a message box (Fig. 83).
⑥
Click "OK" to change the settings to the selected values, and then click the "OK" button in the
displayed message box (Fig. 84) to complete the setting process.
⑦
After the "OK" button is clicked, the item input window will appear again. Click the "Cancel" button to
close the item input window.
To cancel the settings, click the "Cancel" button in any step from
②
to
⑤
.
3.6.6.6 Display contrast setting (Contrast)
①
Click the "Setup (S)" menu, and then select and click "Contrast" from the "LCD" drop-down list.
②
The following window will be displayed (Fig. 85). Set the contrast of displayed dots here.
③
Use the up/down switch on the right side of the window to set the numerical value.
Range: 1 to 63
Higher values will result in a higher contrast.
④
After the setting is complete, click the "OK" button to display a message box (Fig. 86).
Fig.83
Fig.84
Fig.85
Fig.86