![background image](http://html1.mh-extra.com/html/oval/el-2310-08e-series/el-2310-08e-series_instruction-manual_1662134047.webp)
E-023-2-E
⑤
Click the "OK" button to return to the window from before the check, and then click the "Cancel" button
to close the window.
Clicking "OK" here will start the converter internal state check over again.
3.7.1.1.4 LCD test (LCD test)
①
Click the "Diag/Service (T)" menu, select "Self Diag" from the "Test/Status" drop-down list, and then
click "LCD test" under that.
②
The following window will be displayed (Fig. 105). This will test the LCD.
・
" Back light": Tests the back light. Shines white for 3 seconds, shines orange for 3 seconds, turns off for
3 seconds, and then repeats the process one more time.
・
" LED": Tests the LED. Turns red and green on 1.5 seconds each, then turns them off for 1.5 seconds,
and repeats the process five more times. Red and green are not turned on simultaneously.
・
" LCD": Tests the LCD. Turns all dots on for 3 seconds, then off for 3 seconds, and then repeats the
process one more time.
③
Click the "OK" button to display a message box (Fig. 106).
④
Click "OK" to start the test. Note that if another test is started during the execution of a test, then the
first test will be cancelled and the new test will be given priority.
⑤
Click the "OK" button to return to the window from before the check, and then click the "Cancel" button
to close the window.
Clicking "OK" here will start the LCD test over again.
Fig.105
Fig.106