User Manual of Network Fisheye Camera
97
Figure 5-55
Heat Map Configuration
5.
Go to
Arming Schedule
tab, and click-and-drag the mouse on the time bar to set
the arming schedule.
6.
Go to
Linkage Method
tab, and select the linkage method by checking the
checkbox of notify the surveillance center.
7.
Click
Save
to save the settings.
Notes:
•
The heat map statistics will be calculated under
Application
tab. Go to
Application
to check the heat map statistics.
•
The heat map function is not supported when you choose the decoding mode as
hardware decoding and the display mode as 180 Panoramic View or 4PTZ. Thus,
you will not see the heat map configuration interface or the Application on menu
bar when you choose the mentioned modes.
