User Manual of Network Fisheye Camera
82
Normal configuration adopts the same set of motion detection parameters in the
daytime and at night.
Tasks 1: Set the Motion Detection Area
Steps:
1.
Enter the Motion Detection Settings interface.
Configuration > Event > Basic Event > Motion Detection
Figure 5-45
Motion Detection Settings
2.
Check the checkbox of
Enable Motion Detection
.
3.
(Optional) Check the checkbox of
Enable Dynamic Analysis for Motion
if you
want to mark the detected objects with green rectangles on the live view
window.
Note:
You can go to
Configuration > Local Configuration > Live View
Parameters
, and then select Disable for
Rules
if you don’t want the detected
