User Manual of Network Fisheye Camera
95
Figure 5-54
Intrusion Detection Settings
7.
Repeat the above steps to configure other regions. Up to 4 regions can be set.
You can click the Clear button to clear all pre-defined regions.
8.
You can click the
Clear
button to clear the pre-defined region.
9.
Set the arming schedule
.
Refer to
Task 2: Set Arming Schedule for Motion
Detection in Section 5.6.1.
10.
Set the linkage method. Refer to
Task 3: Set Linkage Method for Motion Detection
in Section 5.6.1.
11.
Click
Save
to save the settings.
