5
4
IF YOU WISH TO FINALLY DISPOSE OF THE DEVICE
1. Remove cables, lid, tie-down brackets from body with compressor and dispose according to
local regulations. Ask your local recycling centre for details about how to do this in accordance
with the applicable disposal regulations.
2. Place the packaging material in the appropriate recycling waste bins wherever possible.
2. PRODUCT FEATURES
• High-efficiency DC compressor and conversion module.
• CFC free and great heat insulation.
• Lowest cooling to -20°C/-4°F (based on 25°C/77°F room temperature).
• Intelligent battery protection system prevents your vehicle from running out of battery.
• LED display control panel for temperature setting, USB charging port: SV/lA.
• Detachable lithium battery: 15600mAh/11.1V.
• Specific parts: interior drain plug, oversized wheels, telescopic handle, cupholders (in the lid), interior LED
light, cutting board and bottle opener.
3. PRODUCT STRUCTURE
Note
: There are buttons on both sides of the telescopic handle, press them at the same time to pull the rod.
The cutting board can be moved by turning the knob on the top cover. Clean and dry the cutting board after
every use.
4. REVERSE LID OPENING DIRECTION
The lid opening direction can be changed according to actual needs, please follow the instructions below:
LID DISASSEMBLY:
Open the lid
at a 90® angle
Reverse the lid
opening direction
Take off the lid
from one side
Align the lid shaft with the
hole on one side and insert it
Take off the lid
from the other side
Fix the lid on the other side,
installaion finished
LID INSTALLATION:
UK: INSTRUCTION MANUAL
UK: INSTRUCTION MANUAL
Sealing strip
Lid latch
Left compartment
Cutting board
LED control panel
Right compartment
Telescopic handle
Bottle opener
Button
Handle
Footpad
Detachable battery
Charging port
Machine compartment
Wheel
