Page 10
Outwater Industries, Inc. assumes no liability for improper installation.
STATION USE WORKING MODE
(PERMANENT CODE)
ENABLE PERMANENT CODE WORKING MODE
ENABLE PERMANENT CODE WORKING MODE
Make sure S1 is moved to 2, S2 is moved to 1
Under locked state.
Unlock the lock with Supervisor Key (Blue) or Master Code, green LED light will flash.
Press: (any 1-9 digit code).
While LED light is flashing.
Lock is locked and a two tone beep
will be heard. Permanent code is
now registered.
Test the programming by entering
the Permanent Code. If programming
is successful, the lock will operate.
*
#
