Page 11
Outwater Industries, Inc. assumes no liability for improper installation.
DELETE PERMANENT CODE
TO OPERATE WITH PERMANENT CODE
Under locked state.
Unlock the lock with Supervisor Key (Blue) or Master Code, green LED light
will keep flashing.
When green LED light is flashing, touch Supervisor Key (Blue) or enter
Master Code again. A three tone beep will be heard and red LED light
will flash thrice. Permanent Code is deleted.
To Lock:
To Unlock:
Enter Permanent Code +
Will lock automatically in 4 seconds.
#
NOTE: If an incorrect code is entered four consecutive times, the lock will alarm for one full minute, or until a registered
Master Key or Supervisor Key is touched to the key reader.
NOTE: Lock will not reset by removing the batteries