Page 4
Outwater Industries, Inc. assumes no liability for improper installation.
REGISTER SUPERVISOR KEY(S)
Go to a lock previously programmed with
existing Master Key, and is under a locked
state.
Touch the Master Key (Red) to the key
reader for one full second. The lock will
unlock and the green LED light will flash.
While LED light is flashing, touch each
of the Supervisor Key(s)(Blue) to the key
reader at a time. A single tone beep will
be heard each time a new key is touched
to the lock indicating acceptance.
When finished touching all Supervisor Keys
(Blue), end programming by touching the
Master Key (Red) to the key reader.
Test the programming by touching the
Supervisor Key (Blue) to the key reader
of lock. If programming is successful, the
lock will operate.
REGISTER/CHANGE MASTER CODE
Go to a lock previously programmed with
existing Master Key, and is under a locked
state.
Test the programming by key in master
code of lock. If programming is successful,
the lock will operate.
While LED is flashing, Press:
(any 1-9 digit code). A two tone beep will
be heard and the lock will lock to indicate
acceptance.
Touch the Master Key (Red) to the key
reader for one full second. The lock will
unlock and the green LED light will flash.
*
#