background image

Important Safety Instructions 

Warning: For your own and the safety of other persons it is important to follow below instructions and 

obey warnings.

 

Symbol explanation

 

This warning triangle calls attention to hazards that it can lead to death or to severe 

injuries or which is important for the functioning of the awning. 

This sign identifies important notes. 

Safety instructions

 

To install this awning technical knowledge is necessary. 

Do not mount this awning 

yourself but contact a professional workman for help if necessary 

you  are  unsure  if  the  awning  can  be  mounted  on  the  place  you  chose  for 
installation. 

you do not understand the instruction manual or parts of it. 
you do not have necessary tools available. 
you do not have necessary technical knowledge 

A minimum of two healthy adults are required to move and install the awning 

as 

the product is big and heavy. Do not try to install the awning alone. If the awning falls, it 

could cause serious injuries and damages! Contact an authorized assembler for help. 

Do not install the awning when you find damage parts are that parts are missing.

 

       

Contact your dealer. 

Keep children and pets out of the working area during assembly and 

 

adjustments.

 

This product and its fixing parts are only suitable for installation on a plain 

cement wall or stable unrendered brickwork. If the wall/brickwork shows cracks 

you have to consult a professional.

 

If your building has an exterior shell (such as insulation, double brick wall, brick 

 

facing), installation should be taken out by a professional.

 

Nobody is allowed to change the 

products’ design and structure 

without the 

 

permission of manufacture or authorized deputy. 

Please make sure that your hands are clean at the time of the assembly; otherwise you 

 

may soil the awning fabric and frame. 

       

The operation in frosty conditions may damage the awning.

 

The operation in snowy conditions may damage the awning.

 

Summary of Contents for 840-213

















Reviews: