12
Installation procedure
:
Step 1: Draw lines on the wall
Choose the position,then draw up the position of bolt holt hole by pencil as blow picture,please make sure hole the of each
group on the same horizontally or vertically.
Attention
:
figure in
“
L
”
is product’s length
,
the blow picture is mean
the distance for brackets holes is L-14cm(For example: the product actual length of 2.95 m
,
the distance
=2950mm-140mm=2810mm
);
longitudinal distance for holes is 10 cm.
Figure A for 2.95m, 3.45m; Figure B for 3.95m
A:
B:
82mm
