Alternate Door Configuration
(Door on Left or Right of Center)
When configuring the Cabana so
the Door is positioned on the
left or right of center wall panel in
front. Follow the general
directions in this manual for a
regular door configuration and note
the following changes.
A
.
Follow sequential
Steps 9-17
in the
Wall Section for regular configuration to
position and secure wall panels.
For Door on left side, align and attach two
Window Wall Panels in center and right
positions. For Door on right side, configure
Window Walls on opposite side.
B
.
With walls positioned and attached together, locate Door Jamb and orientate on Side Wall Panel
stud. Align Door Jamb so Flush with bottom plate of wall framing. Wall siding will overhang 1/2” on
outside. Plate will overhang doorway side by 1/2”.
C
.
When correctly aligned, attach Door
Jamb to wall stud with 4 - 2 1/2” screws.
D.
Attach 1 Vertical and Horizontal Door
Stop. See
Step 64
for detail. May have
to trim Horizontal Door Stop to fit.
Door Stops
1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25
