Parts List:
A. Floor Section
3 - 35”w x 75”d Floor Joist Frames
2 - 48” x 75” Plywood Floor Frame - Large
1 - 9”w x 75”d Plywood Floor - Small
4 - 1 1/2” x 3 1/2” x 72” Floor Joists
3 - 1 1/2” x 3 1/2” x 57” Floor Runners - Long
3 - 1 1/2” x 3 1/2” x 48” Floor Runners - Short
B. Wall Section
Main Wall Panels
7 - 35”w x 75”h Solid Wall Panels (4 walls with Bottom Plates
Unattached)
4 - 1 1/2” x 2 1//2 x 35” Bottom Wall Plates
2 - 35”w x 75”h Window Wall Panels
2 - Window Inserts
Door Jambs & Header
2 - 1 1/2”t x 3”w x 73”l Vertical Door Jambs
1 - 2”t x 3”w x 35”l Door Header (Dado cut on edge)
Gable Walls
2 - Side Gable Walls - Triangular shaped
Top Wall Plates
4 - 3/4” x 2 1/2” x 50”l Front & Rear Top Wall Plate - Angle cut on
edge
2 - 3/4” x 2 1/2” x 75” Side Top Wall Plate - Angle cut on ends
C. Rafter and Roof Section
18 - 1 1/2” x 2 1/2” x 44 7/8” - Rafters (angle cut & drilled)
2 - 3/4” x 3 1/2” x 44”l - Ridge Boards
2 - 3/4” x 3 1/2” x 61”l - Ridge Boards
2 - 3/4” x 3 1/2” x 10”l - Ridge Board Connectors
4 - 1/2”t x 4 1/2”w x 52 1/2”l Soffits (Front and Rear)
Roof Panels
4 - Outside Roof Panels 41”w (Shingles overhanging roof battens
on 1 end)
2 - Middle Roof Panel 35”w (Shingles flush with roof battens)
3 - 3/4”t x 3 1/2”w x 48” Roof Gussets (angle cut on ends)
D. Miscellaneous Section
Bottom Skirting
10 - 1/2” x 4 1/2” x 35”l Bottom Skirting
Corner & Wall Trim
4 - 1/2”t x 4 1/2”w x 82”l - Wide Corner Trim
10 - 1/2”t x 2 1/2”w x 79”l - Narrow Trim
4 - 1/2”t x 2 1/2”w x 75”l - Filler Trim
4 - 1/2”t x 3 1/2”w x 32 1/4”l - Horizontal Gable Trim
2 - 1/2”t x6” l Horizontal Detail Plate Pieces (Sides)
Facia Trim
4 - 1/2”t x 3 1/2”w x 46”l Side Facia - Angle cut both ends
4 - 1/2”t x 3 1/2”w x 57” l Front & Rear Facia- square cut
2 - 1/2”t x6” l Facia Detail Plate Pieces (front and rear)
2 - Pentagon Facia Plate Pieces - (sides)
Filler Shingles (6” wide)
8 pcs 24” long
4 pcs 18” long for top row of roof
Door
1 - 31 1/2”w x 42”h - Bottom Dutch Door Section
1 - 31 1/2”w x 30”h - Top Dutch Door Section
1 - 1/2”t x 1 3/4”w x 32”l - Horizontal Door Trim
2 - 1/2”t x 2 1/2”w x 72 ”l Interior Vertical Door Stops
1 - 1/2”t x 2 1/2”w x 36”l - Interior Top Horizontal Door Stop
Ridge Caps
2 - 59 1/2”l Roof Ridge Caps - Shaped like upside down “V”
**Miscelaneous Pieces
1 pc - Spare Wall Siding
2 pcs - Spare Shingles- use to shim door, etc
2 - Window / Flower Boxes
Hardware Package
3” Screws
2 1/2” Screws
2” Screws -
1 1/4” Screws -
Finishing Nails -
1 - Door Pull Handle
1 - Exterior Barrel Bolt - Black
1 - Interior Barrel Bolt - Silver
14 - Simpson Strong Tie Roof Connectors
4 - Black Tee Hinges for Dutch Door with 3/4”screws
12 - 1 1/2” long Black Screws for Hinge / Doorway Seam Trim
Tools Required:
Work Gloves and Safety Glasses
Screw Gun with square drive and star bits
Level
2 Large Ladders
Hammer
Clamps
Thank you for purchasing our 9x6 Cabana.
Please take the time to identify all the parts prior to assembly.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 2
