24.
Place
Side Gable Wall
so 1x3 framing sits flush with
the inside of the top plate. It should also be centered
sideways on the top plate. Adjust gable accordingly. Attach
with 6 - 2” screws.
Hint:
Use a straight edge to check the angle of the gable
framing and top plate. Both angles should line up.
Use straight
edge to check
that angle of
gable lines up
with top plate
angle. Adjust
gable for best fit.
Position and attach other
Side Gable Wall.
23.
Next, attach the
Front Top Plates
(2 per side). The
front and rear top plates are angle cut down the length.
Once again, position top plate on wall frame so it is flush.
Front and rear top plates will fit between side top plates.
Attach with 4 - 2” screws per plate.
Complete all
other Top Plate
attachments.
25.
Align and attach opposite Side
Gable Wall as per
Step 24.
1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 11
Front Top Plate
