26.
Position
Front Top Plates
on top of wall studs so they are
flush on the inside with 2x3 wall framing. There are 3 pieces of
Front Top Plates (2 angle cut on one end and one straight cut on
both ends). Together, the plates should be centered evenly on the
wall left to right. Attach by screwing down into top wall framing
with
3 - 2” screws
per piece.Complete both front and rear of shed.
Angle cut
on ends.
Top Plates should be flush
with inside of wall framing.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
Parts (Steps 26,28)
Front & Rear Top Plates
(3/4” x 2 1/2” x 32”)
x 6
(2 angled end, 1 straight)
Hardware (Steps 26,28)
S3
- 2” Screws
x 18 total
27.
Next, attach 2
Side Top Plates
(1 per side). The side top
plates are angle cut down the edge. Once again, position top plate
on wall plate so it is flush with inside of wall framing. Side plate
should also be flush with Front Top Plate. Secure with
4 - 2”
screws
per piece.
Parts (Steps 27)
Side Top Plates
(3/4” x 2 1/2” x 86”)
x 2
(angle cut on edge)
Hardware (Steps 27)
S3
- 2” Screws
x 8 total
Side Top Plate
Front Top Plate
28.
Position the Rear Top Plates on back wall to complete as per
Step 26
. Use
3 - 2” screws
per piece.
