manualshive.com logo in svg

Outdoor living today 8x4 SpaceSaver Bevel, Assembly Manual

Share
Download
Outdoor living today 8x4 SpaceSaver Bevel Assembly Manual Download Page 24

60.

Attach 

Rear Middle Trim

(1/2” x 2 1/2” x 88 3/4”) where wall panels come together at rear seam.

Attach with 8 - 1 1/2” finishing nails aligning tight underneath soffit and center on seam. 

Attach Hinges with 
3/4” & 2” Black Screws.

3/4” screws

2“ Screws

61.

Attach Door Hinges to 

Door

.  Position Hinges equally on door trim as shown above and attach

with Black 3/4” and 2” screws. 

Important - 

Drill

Pilot Holes to 
prevent splitting.

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com          [email protected]

Page 24

Hor. Door Trim

At top of door, align barrel of hinge closer
to bottom of door trim as shown above.
Center hinge on mid trim and at bottom,
closer to the top of the door trim.

59.

To completely trim out rear corners, locate 

Side Rear Corner Trims

(1/2” x 2 1/2” x 88 3/4”) and

Rear Corner Trims

(1/2” x 5 1/2” x 88 3/4”).  Align and attach as per 

Step 58

. 

Summary of Contents for 8x4 SpaceSaver Bevel
































Reviews:

No comments

Brands by name

Popular brands

Load more brands