manualshive.com logo in svg

Outdoor living today 8x4 SpaceSaver Bevel, Assembly Manual

Share
Download
Outdoor living today 8x4 SpaceSaver Bevel Assembly Manual Download Page 23

56.

Position and attach opposite side

Door Trim as per 

Step 55.

58.

Place both trims in front corner and align as illustrated above. Do a dry run prior to attaching to

achieve best fit.  Start with 5 1/2” wide Front Corner Trim and align tight underneath soffit to 
determine vertical height. Attach with 8 - 1 1/2” finishing nails per piece. Position and attach Side Front
Corner Trim (2 1/2” wide) using 8  - 1 1/2” nails, aligning at bottom with wide trim. 

5 1/2”

Side

Skirting

Right Side
Door Trim.

Flush with
Door Jamb.

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com          [email protected]

Page 23

57.

To completely trim out front corners, locate a  

Side Front Corner Trim

(1/2” x 2 1/2” x 80”) and a

Front Corner Trim

(1/2” x 5 1/2” x 79”). 

Side Front
Corner Trim
2 1/2” wide.

Front Corner
Trim 5 1/2” wide.

tight underneath 
soffit.

Front

Skirting

55.

Locate 

Vertical Door Trim

(2 - 1/2” x 3 1/2” x 79”).  Position Door Trim flush with outside of

narrow wall stud.  Trim should be aligned tight underneath Soffit. Attach with 8 - 1 1/2” finishing
nails.  

Flush with
Narrow 
Wall stud.

Vertical
Door Trim.

Tight under-
neath soffit.

See

Step 65 

before

attaching Door Trim.

Use Narrow Wall and

Above Door Trim as a

template to align   

trim.

Summary of Contents for 8x4 SpaceSaver Bevel
































Reviews:

No comments

Brands by name

Popular brands

Load more brands