18
Outdoor Lifestyles by Hearth & Home Technologies • Palazzo Installation Manual • 4082-311 Rev. A • 06/08/15
D. wall Switch Control Assembly
The Palazzo series outdoor gas appliance is supplied with
a wired wall switch control panel, a control mounting
box with cover, and trim ring. See Figure 5.7.
• The wall switch control assembly is shipped prewired
and mounted on appliance top standoff.
NOTE: Trim ring shipped in manual bag.
• Remove (2) screws securing wall switch control
assembly, to standoff.
• Install mounting box in the desired location prior to
finishing materials being installed. See Figure 5.8.
NOTE: Supplied wire allows for control assembly to
be mounted up to 8 ft. from appliance. 15 ft. control
wire extension kits are available (ODPALG-WH15), if
needed. A maximum of two extension kits (30 ft.) can
be used.
• The cover is designed to protect the switch during the
installation of finishing materials as well as to ensure
the clearance necessary for future service of the control
panel. Remove cover once finishing is complete.
• The trim ring is designed to cover any gaps left between
smooth finishing materials such as tile, stucco, etc. and
the control box.
Figure 5.7 wall Box Cover
Figure 5.8 wall Switch Mounting
Control
Mounting Box
With Cover
Wall Switch
Wires
Mounting
Box
Trim
Ring
Control
Panel
Cover
