background image

Smoking Tips

Types of wood to use for smoke:

• Always use a hardwood that has been seasoned for at least 6 months.
• We recommend using Pecan, Hickory , White Oak, Apple, Alder or Mesquite.
• Never use any resin woods like Pine or Cedar.

Note: It is not necessary to soak the wood prior to smoking because hard woods have natural moisture in the wood 
that will release in the smoker as it heats up. In a gas smoker, soaking the wood chips may prolong the life of the 
wood chips but it will also take longer to produce smoke so we will leave that decision up to you.  Do not soak your 
wood chips when using your Smoke Hollow electric smoker.

What you need to smoke meats:

Internal Meat Thermometer
An internal meat thermometer is a must to cook large pieces of meat to make sure it is done internally.

Internal Temperatures for Select Meats
• Cooked Ham -140 degrees
• Ham, Beef-Med, Ground Beef - 160 degrees
• Veal, Lamb, Pork, Beef-Well done - 170 degrees
• Poultry - 180 degrees

Good Tongs or Meat Hook
Use a heavy-duty set of tongs to rotate meat in the smoker because in some cases you may be smoking a very large 
cut of meat.  I prefer a meat hook for ease of use and it does not knock any rub or sauce off of the meat.

Good Oven Mitts
Heavy-duty mitts will assist you in moving hot smoker racks and large pieces of meats and assist in adding water and 
wood chips.

Aluminum Foil
When the outside color of your meat product is at your desired color or look to suit your taste, wrap meat product in 
aluminum foil to keep any more wood resins from turning your meat any darker. Also it will saturate fats from your 
meat product.

28

Summary of Contents for Smoke Hollow Smoke-Tronix D4015BC

































Reviews: